Enclosure Cabinet Air Conditioner

The 1500W cooling capacity suits enclosures up to 2.0 cubic meters with typical electrical heat loads. Actual sizing depends on internal heat dissipation, ambient temperature, and cabinet insulation. Free sizing calculations are available from technical support.

Condensate from the evaporator coil collects in a tray positioned above the condenser. Heat from the condenser coil evaporates the moisture, eliminating external drainage in most installations. An optional drain kit is available for high humidity or sealed environments.

Modbus RTU over RS-485 is standard. Optional BACnet MSTP and Modbus TCP are available. All operational parameters, alarms, and temperature readings are accessible through the communication interface.

Clean air filters every 2-3 months. Inspect condenser coil quarterly. Check refrigerant charge and electrical connections annually. All service points are accessible from the front of the unit for easy maintenance.

The unit includes universal mounting brackets compatible with most standard cabinet cutouts. The 190mm depth allows installation in shallow enclosures. A mounting template is provided for accurate installation.

The unit operates up to 50°C ambient. Above 40°C, the controller modulates compressor speed to maintain cooling performance. The crankcase heater ensures reliable startup in low ambient conditions down to -10°C.